Ford Motor (China) Co., Ltd. is recalling some Lincoln Continental, Lincoln Navigator, and Lincoln MKC vehicles
Recently, Ford Motor (China) Co., Ltd. filed a recall plan with the State Administration for Market Regulation in accordance with the requirements of the Regulations on the Administration of Recall of Defective Automobile Products and the Implementation Measures for the Regulations on the Administration of Recall of Defective Automobile Products, and decided to recall the following vehicles.
From August 11, 2023, a total of 11,480 Lincoln Continental vehicles manufactured between June 24, 2016 and December 5, 2019 will be recalled.
Due to the structure of the parts of the vehicles within the scope of this recall, there is a sharp contact surface between the lens and the gasket inside the rear view camera, causing damage to the anti-reflection coating on the lens, affecting the image quality of the camera, interfering with the driver’s observation of the situation behind the vehicle, and posing a safety hazard.
Ford Motor (China) Co., Ltd. will commission Lincoln brand authorized dealers to replace the rearview cameras for free for vehicles within the scope of the recall to eliminate safety hazards.
From August 11, 2023, a total of 2,556 Lincoln Navigator vehicles manufactured between December 4, 2014 and June 25, 2017 will be recalled.
The vehicles within the scope of this recall may be short-circuited and locally overheated due to improper positioning of the brush holder spring of the air conditioner blower motor, which may cause a fire in the passenger compartment of the vehicle in extreme cases, posing a safety hazard.
Ford Motor (China) Co., Ltd. will commission Lincoln brand authorized dealers to replace the improved air conditioner blower motors free of charge for vehicles within the scope of the recall to eliminate safety hazards.
From August 18, 2023, a total of 69,045 Lincoln MKC vehicles manufactured between June 5, 2014 and June 4, 2019 will be recalled.
Due to the design reasons of some vehicles within the scope of this recall, the printed circuit board of the battery monitoring sensor may be short-circuited due to improper operation during the after-sales maintenance process, causing the surrounding materials to overheat, and in extreme cases, causing the engine compartment to catch fire, which poses a safety hazard.
Ford Motor (China) Co., Ltd. will commission Lincoln brand authorized dealers to install battery monitoring sensor circuit overload protection fuses free of charge for vehicles within the recall range to eliminate safety hazards.
Ford Motor (China) Co., Ltd. will notify relevant owners of the recall by registered mail, text message, etc.
Dongfeng Commercial Vehicle Co., Ltd. recalls some Dongfeng brand D560 series trucks
A few days ago, Dongfeng Commercial Vehicle Co., Ltd. filed a recall plan with the State Administration for Market Regulation in accordance with the requirements of the Regulations on the Administration of Recall of Defective Automobile Products and the Implementation Methods of the Regulations on the Administration of Recall of Defective Automobile Products. Effective from now on, the following vehicles are recalled.
1. Recall some Dongfeng brand D560 series trucks produced from February 6, 2021 to May 11, 2021, totaling 102 vehicles.
The lower edge of the rear protection of the vehicle within the scope of this recall is too high from the ground. When it is rear-ended by the rear car, it cannot effectively prevent the rear car from drilling into the bottom of the vehicle, which poses a potential safety hazard.
The recall was carried out in the context of a defect investigation initiated by the State Administration for Market Regulation. Affected by the investigation, Dongfeng Commercial Vehicle Co., Ltd. decided to replace the rear protection assembly for vehicles free of charge to eliminate safety hazards.
From April 6, 2021 to April 30, 2021, some Dongfeng brand D560 series trucks were produced, totaling 37 vehicles.
The distance between the roof poles of vehicles within the scope of this recall is too large, and in extreme cases, there are potential safety hazards.
The recall was carried out in the context of a defect investigation initiated by the State Administration for Market Regulation. Affected by the investigation, Dongfeng Commercial Vehicle Co., Ltd. decided to install a canopy rod and weld it to eliminate safety hazards.
Dongfeng Commercial Vehicle Co., Ltd. will notify the relevant owners by registered letter, phone call, text message, etc., and arrange for free recall and maintenance.
Chengdu Dayun Automobile Group Co., Ltd. is recalling some 4 × 2 pure electric vans
A few days ago, Chengdu Dayun Automobile Group Co., Ltd. filed a recall plan with the State Administration for Market Regulation in accordance with the requirements of the "Regulations on the Administration of the Recall of Defective Automobile Products" and the "Measures for the Implementation of the Regulations on the Administration of the Recall of Defective Automobile Products". From now on, some 4 × 2 pure electric van transporters produced from September 4, 2017 to December 19, 2018 will be recalled, totaling 71 vehicles.
The electric vacuum pump carried by the vehicles within the scope of this recall may seep and rust due to bumps during the assembly process, reduce the vacuum degree, attenuate the assist function, affect the braking performance, and pose a safety hazard.
The recall was carried out under the condition that the State Administration for Market Regulation initiated a defect investigation. Affected by the investigation, Chengdu Dayun Automobile Group Co., Ltd. will conduct free inspections for vehicles within the scope of the recall. If there is a bump in the appearance and it affects the working performance, it will be replaced with a new electric vacuum pump to eliminate safety hazards.
Emergency response measures: Electric vacuum pump problems usually have occasional abnormal function in the early stage, which is manifested as the pedal becomes heavy and the stamping is laborious. Before the recall and maintenance, it is recommended that users try to drive the light car slowly, focus on checking the automatic start and stop of the electric vacuum pump before each departure, and enter the store for maintenance in time after the recall activity starts. During driving, when the driver detects that the brake pedal has become heavy, he must increase the force of stamping the brake pedal and pull over in time for investigation. Under the condition of ensuring safety, go to the nearest service station to repair and replace the electric vacuum pump, or call for rescue, and check the car to the service station for maintenance. After troubleshooting, it can continue to be put into use.
Chengdu Dayun Automobile Group Co., Ltd. will notify relevant users by phone, email, registered letter, etc.
Porsche (China) Automotive Sales Co., Ltd. recalls some imported Macan and Panamera series vehicles
A few days ago, Porsche (China) Automotive Sales Co., Ltd. filed a recall plan with the State Administration for Market Regulation in accordance with the requirements of the Regulations on the Administration of Recall of Defective Automobile Products and the Measures for the Implementation of the Regulations on the Administration of Recall of Defective Automobile Products. From August 14, 2023, a total of 51 vehicles of some Macan and Panamera series with production dates from April 29, 2014 to September 12, 2022 will be recalled.
The vehicles within the scope of this recall did not tighten the fastening screws for the fixed supports of the seat belts on the left and right sides of the rear row as required. In the event of an accident, the supports may loosen, affecting the restraint effect of the seat belts, resulting in an increased risk of passenger injury and potential safety hazards.
Porsche (China) Automotive Sales Co., Ltd. will replace the fastening screws of the seat belt fixing supports on the left and right sides of the rear row free of charge for vehicles within the scope of the recall through authorized dealers, and tighten them according to the specified torque to eliminate safety hazards.
Porsche (China) Automotive Sales Co., Ltd. will notify the relevant owners by registered letter.
BMW Brilliance Automotive Co., Ltd. and BMW (China) Automotive Trading Co., Ltd. recall some domestic and imported BMW vehicles
Recently, BMW Brilliance Automotive Co., Ltd. and BMW (China) Automotive Trading Co., Ltd. filed a recall plan with the State Administration for Market Regulation in accordance with the requirements of the "Regulations on the Administration of the Recall of Defective Automobile Products" and the "Implementation Measures for the Administration of the Recall of Defective Automobile Products". The following vehicles will be recalled from now on.
I. BMW Huachen Automotive Co., Ltd.
Recall some domestic iX3 electric vehicles with production dates from August 29, 2022 to November 23, 2022, a total of seven units.
Second, BMW (China) Automotive Trading Co., Ltd.
Recall 13 partially imported i4 electric vehicles with production dates from June 21, 2022 to August 1, 2022; 8 partially imported iX electric vehicles with production dates from June 28, 2022 to September 1, 2022; recall 1 imported i7 electric vehicle with production dates from September 1, 2022.
The vehicles within the scope of this recall are damaged due to the supplier’s production process error, and the combined charging unit is malfunctioning, which may cause charging interruption, causing the vehicle to fail to start or the high-voltage system to shut down during driving, posing a safety hazard.
BMW Brilliance Automotive Co., Ltd. and BMW (China) Automotive Trading Co., Ltd. will replace the combined charging unit for vehicles within the scope of the recall free of charge to eliminate safety hazards.
BMW Brilliance Automotive Co., Ltd. and BMW (China) Automotive Trading Co., Ltd. will notify relevant users in the form of registered letters and connected driving messages.